This is an STL File only, not a physical product. No commercial license is granted to the purchaser, the STL file is for individual use by the original purchaser only.
You must facilitate the printing and are responsible for following all laws. The end user assumes all risk.
I recommend using ASA filament and tree supports for this print. Extra wall, top and bottom layers and an infill of over 30% is also recommended.
The Single Shot Fixed Magazine Device inserts just like a regular magazine, but has the ability to lock into your rifle.
On the AK platform, you will need to remove your bolt carrier and gas piston assembly to engage or disengage the lock feature. Once locked, the single shot magazine sled cannot be removed unless the action is disassembled in that fashion.
For added retention, add two 6x2mm magnets with some glue to the lug and key.
